The ReNew Hearing Aid Dryer is an affordable and effective dehumidifier designed to remove moisture that inherently builds-up inside hearing instruments. This product uses heat to remove the moisture. With a specially designed vented lid, residual moisture escapes from the unit, eliminating the need for a desiccant. The Renew Hearing Aid Dryer comes with a humidity switch that enables the user to choose the duration of the drying cycle, depending on seasonal humidity. The low humidity setting generates a 2 hour drying cycle whereas the normal and high humidity settings yield 4 and 8 hour drying cycles respectively.
The ReNew Hearing Aid Dryer is very easy to use. Simply connect the AC power cord into the back of the unit and plug the device into a standard wall outlet. Lift up the easy-to-open compartment and place clean and disinfected hearing instruments inside with the hearing instrument battery doors open. The unit has a designated magnetic strip for storing batteries during the drying cycle if the user prefers to take the batteries out of the hearing instruments. After selecting one of the three humidity options, close the lid and press the ON/OFF button to start the drying time. Press the REFRESH button to activate a 1-hour optional UV light cycle for additional surface disinfecting. The ReNew Hearing Aid Dryer will automatically shut off after the pre-determined drying cycle is completed. Once the unit shuts off, open the lid, re-insert batteries if they were removed and you are ready to go. As an added bonus, the unit comes equipped with a built-in battery tester located on the inside of the drying chamber. For a QuickFlick orientation to the product, access the Oaktree Product’s YouTube channel and watch Dave “The Wave” Kemp’s tutorial on the ReNew Hearing Aid Dryer.